Packaging of the hottest sanitary ceramics and cer

Packaging of sanitary ceramics and ceramic tiles

the packaging of sanitary ceramics is divided into cartons and checkered wooden boxes. The simple ones are also bundled with straw ropes

the material of cartons for export products shall comply with the provisions of gb5034, and the material of cartons for domestic products shall comply with the provisions of gb6544. Checkered wooden cases usually use red and white pine boards. The filling material is generally foamed plastic or other materials with similar properties. Corrugated boxes can be stapled and bonded in a specific environment. When nailing the synthetic box, the spacing between cloth nails shall not be greater than 70mm. When gluing the box, adhesive tape or strong adhesive tape shall be used, and its width shall not be less than 50mm

in order to facilitate handling, the mass of each package is not more than 50, and the modulus of plastic compound is increased in proportion to the content of long fiber kg

the package shall be clearly marked with product name, model, grade, color, manufacturer, etc

packaged products are best stored in a dry, clean and well ventilated warehouse. Code according to variety, model, grade and color

size less than 400mm × 400mm ceramic wall and floor tiles are generally packed in cartons. The material of cartons for export products shall comply with the provisions of regulation gb5034, and the material of cartons for domestic products shall comply with the provisions of gb6544. Generally, one box is 1m2 or 1.5m2

large size ceramic bricks are generally installed naked, and 2 ~ 4 bricks are a package according to the quality of bricks. First fix the four corners of the brick with special foam plastic, and then fix them with strong glue. This kind of packaging saves board boxes, and the corners of the brick are not easy to be magnetized, reducing the loss in transportation

there should be a clear trademark on the back of the product. The packing box shall be marked with the name of the manufacturer, trademark, specification, grade number, color number, etc

source: Ceramic procurement

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. For example, the author believes that the new national standard GB 4806.1 ⑵ 016 "general safety requirements" has further clarified and infringed the principal person of the food contact material production enterprise. Please contact us, and we will delete it immediately after verification